International Journals
These publications are provided to the academic community for use in teaching and research. All copyrights remain with the appropriate parties as listed in the publications themselves.
Published
† Equally contributed first author
[31] G. S. Lee, S. H. Lee, G. Y. Lee, "Tunable mechanical properties of Vectran liquid crystal polymer (LCP) short fiber-reinforced soft composite," Fibers and Polymers, 24: 207-220, 2023.
[30] O. V. Tuyboyov, G. S. Lee, G. Y. Lee, "Multi-mode soft composite bending actuators based on glass fiber textiles interwoven with shape memory alloy wires: development and use in the preparation of soft grippers," International Journal of Precision Engineering and Manufacturing-Green Technology, 10:1263–1280, 2023.
[29] T. Im, G. Y. Lee, M. Son, and C. S. Lee, "Introduction to mask-free patterning of metal lines using aerodynamically focused nanoparticle system" MRS Bulletin, 47: 1-8, 2022.
[28] S. H. Min, Y. J. Quan, S. Y. Park, G. Y. Lee, and S. H. Ahn, "Interoperable Nanoparticle Sensor Capable of Strain and Vibration Measurement for Rotor Blade Monitoring," Sensors, 21(11): 3648, 2021.
[27] S. H. Min, H. J. Kim, Y. J. Quan, H. S. Kim, J. H. Lyu, G. Y. Lee, and S. H. Ahn, "Stretchable chipless RFID multi-strain sensors using direct printing of aerosolised nanocomposite," Sensors and Actuators A-Physical, 313: 112224, 2020.
[26] S. H. Min, T. H. Lee, G. Y. Lee, D. Zontar, C. Brecher, and S. H. Ahn, "Directly Printed Low-Cost Nanoparticle Sensor for Vibration Measurement during Milling Process," Materials, 13(13): 2920, 2020.
[25] X. Wang, B. Ha, G. Y. Lee, H. Kim, J. Yu, H. Rhee, K. N. Njau, Y. A. C. Jande, and S. H. Ahn, "Low-cost far-field wireless electrical load monitoring system applied in anoff-grid rural area of Tanzania," Sustainable Cities and Society, 59: 102209, 2020.
[24] G. Y. Lee, M. S. Kim, S. H. Min, H. S. Kim, H. J. Kim, R. Keller, J. B. Ihn, and S. H. Ahn, "Highly Sensitive Solvent-free Silver Nanoparticle Strain Sensors with Tunable Sensitivity Created using an Aerodynamically Focused Nanoparticle (AFN) Printer," ACS Applied Materials & Interfaces, 11(29): 26421-26432, 2019.
[23] H. J. Kim, H. S. Kim, G. Y. Lee, M. S. Kim, S. H. Min, R. Keller, J. B. Ihn, and S. H. Ahn, "Three-dimensional carbon fiber composite printer for CFRP repair," Composites Part B: Engineering, 174: 106945, 2019.
[22] S. Roundy, M. Kim, G. Y. Lee, and S. H. Ahn, "Preface for the Special Issue of Energy Harvesting," International Journal of Precision Engineering and Manufacturing-Green Technology, 6: 669 – 670, 2019.
[21] S. H. Min, T. H. Lee, S. Lee, J. H. Song, G. Y. Lee, D. Zontar, C. Brecher, and S. H. Ahn, "Simulation of electrical conductivity for nanoparticles and nanotubes composite sensor according to geometrical properties of nanomaterials," Composites Part B: Engineering, 174: 107003, 2019.
[20] S. H. Min, G. Y. Lee, and S. H. Ahn, "Direct printing of highly sensitive, stretchable, and durable strain sensor based on silver nanoparticles/multi-walled carbon nanotubes composites," Composites Part B: Engineering, 161: 395-401, 2019.
[19] G. Y. Lee, H. T. Lee, W. H. Ryu, S. H. Ahn, and J. Yang, "Resistive pressure sensor based on cylindrical micro structures in periodically ordered electrospun elastic fibers," Smart Materials and Structures, 27(11): 11LT01, 2018.
[18] H. T. Lee, M. S. Kim, G. Y. Lee, C. S. Kim, and S. H. Ahn, “Shape memory alloy (SMA) based microscale actuators with 60% deformation rate and 1.6 kHz actuation speed,” Small, 14(23): 1801023, 2018.
[17] G. Y. Lee, M. Kim, Y. J. Quan, M. S. Kim, T. J. Y. Kim, H. S. Yoon, S. Min, D. H. Kim, J. W. Mun, J. W. Oh, I. G. Choi, C. S. Kim, W. S. Chu, J. Yang, B. Bhandari, C. M. Lee, J. B. Ihn, and S. H. Ahn, “Machine health management in smart factory: A review,” Journal of Mechanical Science and Technology, 32(3), 2018. (Invited paper)
[16] J. Zhang, G. Y. Lee, C. Cerwyn, J. K. Yang, F. Fondjo, J. H. Kim, M. Taya, D. Gao, J. H. Chung, “Fracture-Induced Mechano-Electrical Sensitivities of Paper-Based Nanocomposites,” Advanced Materials Technologies, 3(3): 1700266, 2018.
[15] J. C. Rivey, G. Y. Lee†, J. Yang, Y. Kim, and S. Kim, “Visualization of stress wave propagation via air-coupled acoustic emission sensors,” Smart Materials and Structures, 26(2): 025020, 2017. (SCI, IF 2.909, JCR Rank 9/58 in INSTRUMENTS & INSTRUMENTATIONS, Citation by Google Scholar 1)
[14] V. Khare, S. Sonkaria, G. Y. Lee, S. H. Ahn, and W. S. Chu, “From 3D to 4D Printing - Design, Material Fabrication for Multi-Functional Multi-Materials,” International Journal of Precision Engineering and Manufacturing-Green Technology, 4(3): 291-299, 2017. (SCIE, IF 3.494, JCR Rank 4/44 in ENGINEERING, MANUFACTURING, Citation by Google Scholar 2)
[13] W. S. Chu, M. S. Kim, K. T. Lee, B. Bhandari, G. Y. Lee, H. S. Yoon, H. S. Kim, J. I. Park, E. Bilegt, J. Y. Lee, J. H. Song, G. H. Park, P. Bhandari, C. S. Lee, C. Song, and S. H. Ahn, "Design and Performance Evaluation of Korean Traditional Heating System - Ondol: Case Study in Nepal," Energy and Buildings, 138: 406-414, 2017. (SCIE, IF 4.067, JCR Rank 5/61 in CONSTRUNTION & BUILDING TECHNOLOGY, Citation by Google Scholar 1)
[12] G. Y. Lee, C. Chong, P. G. Kevrekidis, J. Yang, “Wave mixing effect in coupled phononic crystals via a variable stiffness mechanism,” Journal of the Mechanics and Physics of Solids, 95: 501-516, 2016. (SCI, IF 4.255, JCR Rank 5/133 in MECHANICS, Citation by Google Scholar 3)
[11] J. I. Park, G. Y. Lee, J. Yang, C. S. Kim, and S. H. Ahn, “Flexible Ceramic-Elastomer Composite Piezoelectric Energy Harvester Fabricated by Additive Manufacturing,” Journal of Composite Materials: Special Issue, 50(12): 1573-1579, 2016. (SCIE, IF 1.494, JCR Rank 10/25 in MATERIALS SCIENCE, COMPOSITES, Citation by Google Scholar 5)
[10] B. Bhandari, K. T. Lee, G. Y. Lee, Y. M. Cho, and S. H. Ahn, “Optimization of hybrid renewable energy power systems: A review,” International Journal of Precision Engineering and Manufacturing-Green Technology, 2(1): 99-112, 2015. (SCIE, IF 3.494, JCR Rank 4/44 in ENGINEERING, MANUFACTURING, Citation by Google Scholar 88)
[9] S. H. Ahn, H. S. Yoon, K. H. Jang, E. S. Kim, H. T. Lee, G. Y. Lee, C. S. Kim, and S. W. Cha, “Nanoscale 3D printing process using aerodynamically focused nanoparticle (AFN) printing, micro-machining, and focused ion beam (FIB),” CIRP Annals-Manufacturing Technology, 64(1): 523-526, 2015. (SCIE, IF 2.893, JCR Rank 7/44 in ENGINEERING, INDUSTRIAL, Citation by Google Scholar 13)
[8] G. Y. Lee, J. I. Park, C. S. Kim, H. S. Yoon, J. Yang, and S. H. Ahn, “Aerodynamically focused nanoparticle (AFN) printing: novel direct printing technique of solvent-free and inorganic nanoparticles,” ACS Applied Materials & Interfaces, 6(19): 16466-16471, 2014. (SCI, IF 7.504, JCR Rank 22/275 in MATERIALS SCIENCE, MULTIDISCIPLINARY, Citation by Google Scholar 19)
[7] D. M. Chun, D. Gaasuren, C. V. Ngo, C. S. Kim, G. Y. Lee, and S. H. Ahn, “Fabrication of Transparent Super hydrophobic Surface on Thermoplastic Polymer using Laser Beam Machining and Compression Molding for Mass Production,” CIRP Annals Manufacturing Technology, 63(1): 525-528, 2014. (SCIE, IF 2.893, JCR Rank 7/44 in ENGINEERING, INDUSTRIAL, Citation by Google Scholar 19)
[6] D. M. Chun, C. S. Kim, J. O. Choi, G. Y. Lee, C. S. Lee and S. H. Ahn, “Multi-layer Deposition of Ceramic and Metal at Room Temperature using Nano-Particle Deposition System (NPDS) and Planarization Process,” International Journal of Advanced Manufacturing Technology, 72(1): 41-46, 2014. (SCIE, IF 2.209, JCR Rank 25/60 in AUTOMATION & CONTROL SYSTEMS, Citation by Google Scholar 8)
[5] R. Wu, M. W. Han, G. Y. Lee, and S. H. Ahn, “Woven type smart soft composite beam with in-plane shape retention,” Smart Materials and Structures, 22(12): 125007, 2013. (SCI, IF 2.909, JCR Rank 9/58 in INSTRUMENTS & INSTRUMENTATIONS, Citation by Google Scholar 17)
[4] C. Pang, G. Y. Lee, T. I. Kim, S. M. Kim, H. N. Kim, S. H. Ahn, and K. Y. Suh, “A flexible and highly sensitive strain-gauge sensor using reversible interlocking of nanofibres,” Nature Materials, 11: 795-801, 2012. (SCI, IF 39.737, JCR Rank 1/275 in MATERIALS SCIENCE, MULTIDISCIPLINARY, Citation by Google Scholar 609)
[3] S. H. Ahn, J. O. Choi, C. S. Kim, G. Y. Lee, H. T. Lee, K. J. Cho, D. M. Chun, and C. S. Lee, “Laser-assisted nano particle deposition system and its application for dye sensitized solar cell fabrication,” CIRP Annals - Manufacturing Technology, 61(1): 575-578, 2012. (SCIE, IF 2.893, JCR Rank 7/44 in ENGINEERING, INDUSTRIAL, Citation by Google Scholar 22)
[2] B. Bhandari, G. Y. Lee, and S. H. Ahn, “A review on IPMC material and actuators and sensors: fabrication, characterization and applications,” International Journal of Precision Engineering and Manufacturing, 13(1): 141-163, 2012. (SCIE, IF 1.497, JCR Rank 62/130 in ENGINEERING, MECHANICAL, Citation by Google Scholar 101)
[1] G. Y. Lee, J. O. Choi, M. S. Kim, and S. H. Ahn, “Fabrication and reliable implementation of an ionic polymer–metal composite (IPMC) biaxial bending actuator,” Smart Materials and Structures, 20(10): 105026, 2011. (SCI, IF 2.909, JCR Rank 9/58 in INSTRUMENTS & INSTRUMENTATIONS, Citation by Google Scholar 37)
[31] G. S. Lee, S. H. Lee, G. Y. Lee, "Tunable mechanical properties of Vectran liquid crystal polymer (LCP) short fiber-reinforced soft composite," Fibers and Polymers, 24: 207-220, 2023.
[30] O. V. Tuyboyov, G. S. Lee, G. Y. Lee, "Multi-mode soft composite bending actuators based on glass fiber textiles interwoven with shape memory alloy wires: development and use in the preparation of soft grippers," International Journal of Precision Engineering and Manufacturing-Green Technology, 10:1263–1280, 2023.
[29] T. Im, G. Y. Lee, M. Son, and C. S. Lee, "Introduction to mask-free patterning of metal lines using aerodynamically focused nanoparticle system" MRS Bulletin, 47: 1-8, 2022.
[28] S. H. Min, Y. J. Quan, S. Y. Park, G. Y. Lee, and S. H. Ahn, "Interoperable Nanoparticle Sensor Capable of Strain and Vibration Measurement for Rotor Blade Monitoring," Sensors, 21(11): 3648, 2021.
[27] S. H. Min, H. J. Kim, Y. J. Quan, H. S. Kim, J. H. Lyu, G. Y. Lee, and S. H. Ahn, "Stretchable chipless RFID multi-strain sensors using direct printing of aerosolised nanocomposite," Sensors and Actuators A-Physical, 313: 112224, 2020.
[26] S. H. Min, T. H. Lee, G. Y. Lee, D. Zontar, C. Brecher, and S. H. Ahn, "Directly Printed Low-Cost Nanoparticle Sensor for Vibration Measurement during Milling Process," Materials, 13(13): 2920, 2020.
[25] X. Wang, B. Ha, G. Y. Lee, H. Kim, J. Yu, H. Rhee, K. N. Njau, Y. A. C. Jande, and S. H. Ahn, "Low-cost far-field wireless electrical load monitoring system applied in anoff-grid rural area of Tanzania," Sustainable Cities and Society, 59: 102209, 2020.
[24] G. Y. Lee, M. S. Kim, S. H. Min, H. S. Kim, H. J. Kim, R. Keller, J. B. Ihn, and S. H. Ahn, "Highly Sensitive Solvent-free Silver Nanoparticle Strain Sensors with Tunable Sensitivity Created using an Aerodynamically Focused Nanoparticle (AFN) Printer," ACS Applied Materials & Interfaces, 11(29): 26421-26432, 2019.
[23] H. J. Kim, H. S. Kim, G. Y. Lee, M. S. Kim, S. H. Min, R. Keller, J. B. Ihn, and S. H. Ahn, "Three-dimensional carbon fiber composite printer for CFRP repair," Composites Part B: Engineering, 174: 106945, 2019.
[22] S. Roundy, M. Kim, G. Y. Lee, and S. H. Ahn, "Preface for the Special Issue of Energy Harvesting," International Journal of Precision Engineering and Manufacturing-Green Technology, 6: 669 – 670, 2019.
[21] S. H. Min, T. H. Lee, S. Lee, J. H. Song, G. Y. Lee, D. Zontar, C. Brecher, and S. H. Ahn, "Simulation of electrical conductivity for nanoparticles and nanotubes composite sensor according to geometrical properties of nanomaterials," Composites Part B: Engineering, 174: 107003, 2019.
[20] S. H. Min, G. Y. Lee, and S. H. Ahn, "Direct printing of highly sensitive, stretchable, and durable strain sensor based on silver nanoparticles/multi-walled carbon nanotubes composites," Composites Part B: Engineering, 161: 395-401, 2019.
[19] G. Y. Lee, H. T. Lee, W. H. Ryu, S. H. Ahn, and J. Yang, "Resistive pressure sensor based on cylindrical micro structures in periodically ordered electrospun elastic fibers," Smart Materials and Structures, 27(11): 11LT01, 2018.
[18] H. T. Lee, M. S. Kim, G. Y. Lee, C. S. Kim, and S. H. Ahn, “Shape memory alloy (SMA) based microscale actuators with 60% deformation rate and 1.6 kHz actuation speed,” Small, 14(23): 1801023, 2018.
[17] G. Y. Lee, M. Kim, Y. J. Quan, M. S. Kim, T. J. Y. Kim, H. S. Yoon, S. Min, D. H. Kim, J. W. Mun, J. W. Oh, I. G. Choi, C. S. Kim, W. S. Chu, J. Yang, B. Bhandari, C. M. Lee, J. B. Ihn, and S. H. Ahn, “Machine health management in smart factory: A review,” Journal of Mechanical Science and Technology, 32(3), 2018. (Invited paper)
[16] J. Zhang, G. Y. Lee, C. Cerwyn, J. K. Yang, F. Fondjo, J. H. Kim, M. Taya, D. Gao, J. H. Chung, “Fracture-Induced Mechano-Electrical Sensitivities of Paper-Based Nanocomposites,” Advanced Materials Technologies, 3(3): 1700266, 2018.
[15] J. C. Rivey, G. Y. Lee†, J. Yang, Y. Kim, and S. Kim, “Visualization of stress wave propagation via air-coupled acoustic emission sensors,” Smart Materials and Structures, 26(2): 025020, 2017. (SCI, IF 2.909, JCR Rank 9/58 in INSTRUMENTS & INSTRUMENTATIONS, Citation by Google Scholar 1)
[14] V. Khare, S. Sonkaria, G. Y. Lee, S. H. Ahn, and W. S. Chu, “From 3D to 4D Printing - Design, Material Fabrication for Multi-Functional Multi-Materials,” International Journal of Precision Engineering and Manufacturing-Green Technology, 4(3): 291-299, 2017. (SCIE, IF 3.494, JCR Rank 4/44 in ENGINEERING, MANUFACTURING, Citation by Google Scholar 2)
[13] W. S. Chu, M. S. Kim, K. T. Lee, B. Bhandari, G. Y. Lee, H. S. Yoon, H. S. Kim, J. I. Park, E. Bilegt, J. Y. Lee, J. H. Song, G. H. Park, P. Bhandari, C. S. Lee, C. Song, and S. H. Ahn, "Design and Performance Evaluation of Korean Traditional Heating System - Ondol: Case Study in Nepal," Energy and Buildings, 138: 406-414, 2017. (SCIE, IF 4.067, JCR Rank 5/61 in CONSTRUNTION & BUILDING TECHNOLOGY, Citation by Google Scholar 1)
[12] G. Y. Lee, C. Chong, P. G. Kevrekidis, J. Yang, “Wave mixing effect in coupled phononic crystals via a variable stiffness mechanism,” Journal of the Mechanics and Physics of Solids, 95: 501-516, 2016. (SCI, IF 4.255, JCR Rank 5/133 in MECHANICS, Citation by Google Scholar 3)
[11] J. I. Park, G. Y. Lee, J. Yang, C. S. Kim, and S. H. Ahn, “Flexible Ceramic-Elastomer Composite Piezoelectric Energy Harvester Fabricated by Additive Manufacturing,” Journal of Composite Materials: Special Issue, 50(12): 1573-1579, 2016. (SCIE, IF 1.494, JCR Rank 10/25 in MATERIALS SCIENCE, COMPOSITES, Citation by Google Scholar 5)
[10] B. Bhandari, K. T. Lee, G. Y. Lee, Y. M. Cho, and S. H. Ahn, “Optimization of hybrid renewable energy power systems: A review,” International Journal of Precision Engineering and Manufacturing-Green Technology, 2(1): 99-112, 2015. (SCIE, IF 3.494, JCR Rank 4/44 in ENGINEERING, MANUFACTURING, Citation by Google Scholar 88)
[9] S. H. Ahn, H. S. Yoon, K. H. Jang, E. S. Kim, H. T. Lee, G. Y. Lee, C. S. Kim, and S. W. Cha, “Nanoscale 3D printing process using aerodynamically focused nanoparticle (AFN) printing, micro-machining, and focused ion beam (FIB),” CIRP Annals-Manufacturing Technology, 64(1): 523-526, 2015. (SCIE, IF 2.893, JCR Rank 7/44 in ENGINEERING, INDUSTRIAL, Citation by Google Scholar 13)
[8] G. Y. Lee, J. I. Park, C. S. Kim, H. S. Yoon, J. Yang, and S. H. Ahn, “Aerodynamically focused nanoparticle (AFN) printing: novel direct printing technique of solvent-free and inorganic nanoparticles,” ACS Applied Materials & Interfaces, 6(19): 16466-16471, 2014. (SCI, IF 7.504, JCR Rank 22/275 in MATERIALS SCIENCE, MULTIDISCIPLINARY, Citation by Google Scholar 19)
[7] D. M. Chun, D. Gaasuren, C. V. Ngo, C. S. Kim, G. Y. Lee, and S. H. Ahn, “Fabrication of Transparent Super hydrophobic Surface on Thermoplastic Polymer using Laser Beam Machining and Compression Molding for Mass Production,” CIRP Annals Manufacturing Technology, 63(1): 525-528, 2014. (SCIE, IF 2.893, JCR Rank 7/44 in ENGINEERING, INDUSTRIAL, Citation by Google Scholar 19)
[6] D. M. Chun, C. S. Kim, J. O. Choi, G. Y. Lee, C. S. Lee and S. H. Ahn, “Multi-layer Deposition of Ceramic and Metal at Room Temperature using Nano-Particle Deposition System (NPDS) and Planarization Process,” International Journal of Advanced Manufacturing Technology, 72(1): 41-46, 2014. (SCIE, IF 2.209, JCR Rank 25/60 in AUTOMATION & CONTROL SYSTEMS, Citation by Google Scholar 8)
[5] R. Wu, M. W. Han, G. Y. Lee, and S. H. Ahn, “Woven type smart soft composite beam with in-plane shape retention,” Smart Materials and Structures, 22(12): 125007, 2013. (SCI, IF 2.909, JCR Rank 9/58 in INSTRUMENTS & INSTRUMENTATIONS, Citation by Google Scholar 17)
[4] C. Pang, G. Y. Lee, T. I. Kim, S. M. Kim, H. N. Kim, S. H. Ahn, and K. Y. Suh, “A flexible and highly sensitive strain-gauge sensor using reversible interlocking of nanofibres,” Nature Materials, 11: 795-801, 2012. (SCI, IF 39.737, JCR Rank 1/275 in MATERIALS SCIENCE, MULTIDISCIPLINARY, Citation by Google Scholar 609)
[3] S. H. Ahn, J. O. Choi, C. S. Kim, G. Y. Lee, H. T. Lee, K. J. Cho, D. M. Chun, and C. S. Lee, “Laser-assisted nano particle deposition system and its application for dye sensitized solar cell fabrication,” CIRP Annals - Manufacturing Technology, 61(1): 575-578, 2012. (SCIE, IF 2.893, JCR Rank 7/44 in ENGINEERING, INDUSTRIAL, Citation by Google Scholar 22)
[2] B. Bhandari, G. Y. Lee, and S. H. Ahn, “A review on IPMC material and actuators and sensors: fabrication, characterization and applications,” International Journal of Precision Engineering and Manufacturing, 13(1): 141-163, 2012. (SCIE, IF 1.497, JCR Rank 62/130 in ENGINEERING, MECHANICAL, Citation by Google Scholar 101)
[1] G. Y. Lee, J. O. Choi, M. S. Kim, and S. H. Ahn, “Fabrication and reliable implementation of an ionic polymer–metal composite (IPMC) biaxial bending actuator,” Smart Materials and Structures, 20(10): 105026, 2011. (SCI, IF 2.909, JCR Rank 9/58 in INSTRUMENTS & INSTRUMENTATIONS, Citation by Google Scholar 37)
Domestic Journals
Published
[4] G. Y. Lee†, and S. Y. Lee, "Design, Fabrication, and Control of a Rotary Manipulator driven by Twisted Shape Memory Alloy (SMA) Wires," Journal of the Korean Society for Precision Engineering, 40 (8): 665-673, 2023.
[3] E. J. Jang, S. Y. Lee, K. H. Kim, and G. Y. Lee†, "Design and Fabrication of a Millimeter-Scale Rotary Actuator based on the Twisted Shape Memory Alloy (SMA) Wires," Journal of the Korean Society for Precision Engineering, 39 (6): 403-410, 2022.
[2] G. Y. Lee†, and G. S. Lee, "Fabrication of Conductive Patterns by Selective Laser Sintering of Silver Nanoparticles-Photopolymer Ink," Journal of the Korean Society for Precision Engineering, 38 (7): 537-547, 2021.
[1] S. H. Ahn, K. T. Lee, B. Bhandari, G. Y. Lee, C. S. Lee, and C. Song, “Formation Strategy of Renewable Energy Sources for High Mountain Off-grid System Considering Sustainability,” Journal of the Korean Society for Precision Engineering, 29 (9): 958-963, 2012. (Citation by Google Scholar 9)
[3] E. J. Jang, S. Y. Lee, K. H. Kim, and G. Y. Lee†, "Design and Fabrication of a Millimeter-Scale Rotary Actuator based on the Twisted Shape Memory Alloy (SMA) Wires," Journal of the Korean Society for Precision Engineering, 39 (6): 403-410, 2022.
[2] G. Y. Lee†, and G. S. Lee, "Fabrication of Conductive Patterns by Selective Laser Sintering of Silver Nanoparticles-Photopolymer Ink," Journal of the Korean Society for Precision Engineering, 38 (7): 537-547, 2021.
[1] S. H. Ahn, K. T. Lee, B. Bhandari, G. Y. Lee, C. S. Lee, and C. Song, “Formation Strategy of Renewable Energy Sources for High Mountain Off-grid System Considering Sustainability,” Journal of the Korean Society for Precision Engineering, 29 (9): 958-963, 2012. (Citation by Google Scholar 9)
Conference Proceedings and Other Non-journal Articles
Conference Proceedings
[1] G. Y. Lee, M. S. Kim, H. S. Yoon, J. Yang, J. B. Ihn, and S. H. Ahn, “Direct printing of strain sensors via nanoparticle printer for the applications to composite structural health monitoring,” Procedia CIRP, 66: 238 – 242, 2017.
Patents
International Patents
Granted
[3] S. H. Ahn, G. Y. Lee, Apparatus and Method of Transferring, Focusing and Purging of Powder for Direct Printing at Low Temperature, USA, US 9056483, Jun. 16, 2015, Granted.
[2] S. H. Ahn, H. J. Kim, S. H. Song, M. W. Han, G. Y. Lee, Underwater Robot based on flapping, USA, US 9168989, Oct. 27, 2015, Granted.
[1] S. H. Ahn, H. J. Kim, G. Y. Lee, K. T. Lee, R. Wu. J. S. Kim, S. H. Song, Smart Soft Composite Actuator, USA, US 10079335, Sep. 18, 2018, Granted.
Pending
J. B. Ihn, S. H. Ahn, G. Y. Lee, H. S. Kim, M. S. Kim, H. J. Kim, S. H. Min, Three-dimensional printing of composite repair patches and structures, USA, US 20210138747A1, Mar. 13, 2021, Pending.
S. H. Ahn, G. Y. Lee, H. J. Kim, J. O. Choi, Electro Active Polymer Actuator and Manufacturing Method Thereof, PCT/KR2010/004201, 2010, Pending.
S. H. Ahn, G. Y. Lee, K. H. Wie, Mobile Robot Capable of Being Immersed in a Fluid, PCT/KR/2010/003372, 2010, Pending.
S. H. Ahn, W. S. Chu, M. S. Kim, Y. M. Kim, G. Y. Lee, J. Lee, Inchworm Robot, PCT/KR2010/000825, 2010, Pending.
[3] S. H. Ahn, G. Y. Lee, Apparatus and Method of Transferring, Focusing and Purging of Powder for Direct Printing at Low Temperature, USA, US 9056483, Jun. 16, 2015, Granted.
[2] S. H. Ahn, H. J. Kim, S. H. Song, M. W. Han, G. Y. Lee, Underwater Robot based on flapping, USA, US 9168989, Oct. 27, 2015, Granted.
[1] S. H. Ahn, H. J. Kim, G. Y. Lee, K. T. Lee, R. Wu. J. S. Kim, S. H. Song, Smart Soft Composite Actuator, USA, US 10079335, Sep. 18, 2018, Granted.
Pending
J. B. Ihn, S. H. Ahn, G. Y. Lee, H. S. Kim, M. S. Kim, H. J. Kim, S. H. Min, Three-dimensional printing of composite repair patches and structures, USA, US 20210138747A1, Mar. 13, 2021, Pending.
S. H. Ahn, G. Y. Lee, H. J. Kim, J. O. Choi, Electro Active Polymer Actuator and Manufacturing Method Thereof, PCT/KR2010/004201, 2010, Pending.
S. H. Ahn, G. Y. Lee, K. H. Wie, Mobile Robot Capable of Being Immersed in a Fluid, PCT/KR/2010/003372, 2010, Pending.
S. H. Ahn, W. S. Chu, M. S. Kim, Y. M. Kim, G. Y. Lee, J. Lee, Inchworm Robot, PCT/KR2010/000825, 2010, Pending.
Domestic Patents
Granted
[6] S. H. Ahn, S. H. Min, G. Y. Lee, T. H. Lee, S. W. Lee, D. Zontar, Method of monitoring workpiece processing using strain sensor and system for the same, Korea 10-2521884, 2023, Granted.
[5] S. H. Ahn, G. Y. Lee, Apparatus and Method of Transferring, Focusing and Purging of Powder for Direct Printing at Low Temperature, Korea 10-1538443, 2013, Granted.
[4] S. H. Ahn, G. Y. Lee, K. H. Wie, Mobile Robot Capable of Being Immersed in a Fluid, Korea 10-1315893, 2013, Granted.
[3] S. H. Ahn, H. J. Kim, S. H. Song, M. W. Han, G. Y. Lee, Underwater Robot Based on Flapping, Korea 10-1376877, 2014, Granted.
[2] S. H. Ahn, H. J. Kim, G. Y. Lee, K. T. Lee, R. Wu. J. S. Kim, S. H. Song, Smart Soft Composite Actuator, Korea 10-1357462, 2014, Granted.
[1] S. H. Ahn, W. S. Chu, J. C. Lee, H. J. Kim, D. M. Chun, Y. S. Hong, C. S. Kim, G. Y. Lee, J. C. Yeo, Implantable Drug Release Apparatus and Drug Delivery Control System using the Same, Korea 10-1512514, 2015, Granted.
Pending
S. H. Ahn, G. Y. Lee, H. J. Kim, J. O. Choi, Electro Active Polymer Actuator and Manufacturing Method Thereof, Korea 10-2010-0061829, 2010, Pending.
S. H. Ahn, S. Kim, G. Y. Lee, J. Ahn, J. Jung, Wireless Grip Pressure Detecting Golf Shaft for Swing Exercise, Korea 10-2009-0053302, 2009, Pending.
[6] S. H. Ahn, S. H. Min, G. Y. Lee, T. H. Lee, S. W. Lee, D. Zontar, Method of monitoring workpiece processing using strain sensor and system for the same, Korea 10-2521884, 2023, Granted.
[5] S. H. Ahn, G. Y. Lee, Apparatus and Method of Transferring, Focusing and Purging of Powder for Direct Printing at Low Temperature, Korea 10-1538443, 2013, Granted.
[4] S. H. Ahn, G. Y. Lee, K. H. Wie, Mobile Robot Capable of Being Immersed in a Fluid, Korea 10-1315893, 2013, Granted.
[3] S. H. Ahn, H. J. Kim, S. H. Song, M. W. Han, G. Y. Lee, Underwater Robot Based on Flapping, Korea 10-1376877, 2014, Granted.
[2] S. H. Ahn, H. J. Kim, G. Y. Lee, K. T. Lee, R. Wu. J. S. Kim, S. H. Song, Smart Soft Composite Actuator, Korea 10-1357462, 2014, Granted.
[1] S. H. Ahn, W. S. Chu, J. C. Lee, H. J. Kim, D. M. Chun, Y. S. Hong, C. S. Kim, G. Y. Lee, J. C. Yeo, Implantable Drug Release Apparatus and Drug Delivery Control System using the Same, Korea 10-1512514, 2015, Granted.
Pending
S. H. Ahn, G. Y. Lee, H. J. Kim, J. O. Choi, Electro Active Polymer Actuator and Manufacturing Method Thereof, Korea 10-2010-0061829, 2010, Pending.
S. H. Ahn, S. Kim, G. Y. Lee, J. Ahn, J. Jung, Wireless Grip Pressure Detecting Golf Shaft for Swing Exercise, Korea 10-2009-0053302, 2009, Pending.
International Conferences
† Presenter
- M. Kim†, G. Lee, H. Kim, H. Kim, S. Min, J. Ihn, S. Ahn, "Direct printing of nanoparticle strain sensor by using aerodynamically focused nanoparticle (AFN) printer," 2017 International Conference on Engineering Innovation, Seoul National University Graduate School of Engineering Practice, Seoul National University, Seoul, Korea, December 8, 2017.
- S. Min†, G. Lee, H. Lee, H. Kim, S. Ahn, "Fabrication of Piezoelectric Energy Harvester using Nano Particle Deposition System (NPDS)," International Symposium on Green Manufacturing and Applications (ISGMA2017), Hwabaek International Convention Center, Gyeongju, Korea, June 27-July 1, 2017.
- M. Kim†, G. Lee, H. Kim, H. Kim, J. Oh, J. Ihn, S. Ahn, "Variable Gauge Factors of Strain Sensors Printed by Aerodynamically Focused Nanoparticles Printer," International Symposium on Green Manufacturing and Applications (ISGMA2017), Hwabaek International Convention Center, Gyeongju, Korea, June 27-July 1, 2017.
- H. Kim†, G. Lee, M. Kim, H. Kim, J. Oh, J. Ihn, S. Ahn, "Development of Carbon Fiber-Epoxy 3D printer for Direct Composite Repair," International Symposium on Green Manufacturing and Applications (ISGMA2017), Hwabaek International Convention Center, Gyeongju, Korea, June 27-July 1, 2017.
- H. Lee†, G. Lee, S. Ahn, "Actuation of Microscale Shape Memory Alloy Structure with Ion Beam Induced Heating Method," International Symposium on Green Manufacturing and Applications (ISGMA2017), Hwabaek International Convention Center, Gyeongju, Korea, June 27-July 1, 2017.
- G. Lee†, M. Kim, H. Yoon, J. Yang, J Ihn, S. Ahn, "Direct printing of strain sensors via nanoparticle printer for the applications to composite structural health monitoring," 1st CIRP Conference on Composite Materials Parts Manufacturing (CIRP CCMPM 2017), Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany, June 8-9, 2017.
- G. Lee†, S. Ahn, M. Kim, H. Lee, H. Yoon, "Nanoparticle 3D printer," The 7th International Conference on Manufacturing, Machine Design and Tribology, Ramada Plaza Jeju Hotel, Jeju island, Korea, April 19-22, 2017
- J. Oh†, G. Lee, M. Kim, J. Ihn, S. Ahn, "Life Cycle Evaluation of Strain Sensor Printed with Silver Nanoparticles for Composite Health Monitoring," International Symposium on Green Manufacturing and Applications (ISGMA2017), Hwabaek International Convention Center, Gyeongju, Korea, June 27-July 1, 2017.
- S. Ahn†, J. Choi, H. Yoon, G. Lee, H. Lee, "Direct patterning of pre-excited nanoparticles by nanosecond pulsed laser," CIRP STC S meeting, Guimaraes, Portugal (Scientific Technical Committee meeting), August 25, 2016.
- G. Lee†, J. Rivey, Y. Kim, S. Kim, J. Yang, “Visualization of stress wave propagation via air coupled acoustic emission sensors,” SEM, Orlando, FL, USA, June, 2016.
- G. Lee†, J. Yang, " Numerical studies on coupled phononic crystals with switching and amplification capabilities," ASME 2015 Applied Mechanics and Materials Conference (McMAT2015), Seattle, WA, USA, June 29-July 1, 2015.
- G. Lee†, J. Yang, S. Ahn, " Direct printing of spider web-like fiber network via hybrid melt electrospinning," ASME 2015 Applied Mechanics and Materials Conference (McMAT2015), Seattle, WA, USA, June 29-July 1, 2015.
- H. Yoon†, H. Kim, G. Lee, M. Kim, H. Kim, S. Ahn, "Direct printing of strain gauge sensor using nanoparticles onto carbon fiber reinforced plastic (CFRP)," The 10th Asian-Australasian Conference on Composite Materials (ACCM-10), Bexco, Busan, Korea, October 16-19, 2016.
- G. Lee†, H. Lee, H. Kim, S. Ahn, W. Ryu, J. Yang, "Direct Printing of Stretchable and Transparent Thin Film via Melt Electrospinning," International Symposium on Green Manufacturing and Applications (ISGMA) 2016, Korean Society of Precision Engineering, Bali Nusa Dua Convention Center, Bali, Indonesia, June 21~25, 2016.
- G. Lee†, H. Yoon, M. Kim, J. Yang, S. Ahn, "Direct writing of nanoparticles via aerodynamically focused nanoparticle (AFN) printing," International Symposium on Green Manufacturing and Applications (ISGMA) 2016, Korean Society of Precision Engineering, Bali Nusa Dua Convention Center, Bali, Indonesia, June 21~25, 2016.
- S. Ahn†, H. Yoon, K. Jang, E. Kim, H. Lee, G. Lee, C. Kim, S. Cha, "Nanoscale 3D printing process using aerodynamically focused nanoparticle (AFN) printing, micro-machining, and focused ion beam (FIB)," 65th CIRP General Assembly, Part I presentation, Cape Town, South Africa, August 23-29, 2015.
- H. Yoon†, E. Kim, K. Jang, G. Lee, S. Ahn, "Direct Patterning of Micro Conductive Line using AFN Printing," International Symposium on Green Manufacturing and Applications (ISGMA) 2015, Korean Society of Precision Engineering and etc., Shangri-La Hotel, Qingdao, China, June 23~27, 2015.
- H. Yoon†, K. Jang, E. Kim, H. Lee, H. Park, D. Kim, C. Kim, G. Lee, K. Lee, S. Ahn, "CAD/CAM and design for manufacturing (DFM) rules for novel 3D nanoscale printing process," 4th International Conference on Virtual Machining Process Technology (CIRP sponsored conference), CIRP, NSERC CANRIMT (Canadian Network for Research and Innovation in Machining Technology), Vancouver, Canada, June 2-5, 2015.
- G. Lee†, H. Yoon, C. Kim, S. Ahn, D. Chun, "Fabrication of 3D silver structures using aerodynamically focused nanoparticle (AFN) printing," CIRP STC S meeting (Scientific Technical Committe meeting), CIRP, Nantes, France, August 28, 2014.
- H. Yoon†, H. Lee, E. Kim, K. Jang, E. Bilegt, G. Lee, C. Kim, S. Ahn, "Micro-scale Multi-material Structure Fabricated by Aerodynamically Focused Nanoparticle (AFN) Printing," International Aerosol Conference (IAC), Korean Association for Particle and Aerosol Research, BEXCO, Busan, Korea, August 28-September 2, 2014.
- W. Chu†, C. Kim, G. Lee, S. Ahn, "Hybrid Manufacturing Systems Based on 3D Printing Technology," Global 3D Tech Forum 2013, 3D Fusion Industry Association and Korea Electronics Association, Seoul, Korea, October 10-11, 2013.
- S. Ahn†, C. Kim, G. Lee, D. Chun, C. Lee, J. Jeong, D. Jang, "Nanostructured Surface by Nano Particle Deposition System: Method and Mechanism," 63th General Assembly, Part II presentation, Conpenhagen, Denmark, August 18-24, 2013.
- G. Lee†, W. Chu, K. Lee, B. Bhandari, M. Kim, H. Kim, J. Park, E. Bilegt, J. Lee, H. Yoon, G. Park, K. Min, Y. Kang, J. Song, C. Song, C. Lee, S. Ahn, "An Optimal Design and Performance Evaluation of Korean Traditional Ondol System in Varing Gorae Geometry Application of Goguryeo Style Jjok Gudeul," International Symposium on Green Manufacturing and Application (ISGMA 2013), Korean Society of Precision Engineering, Ohau, Hawaii, USA, June 25-29, 2013.
- C. Kim†, G. Lee, J. Choi, H. Lee, J. Park, H. Yoon, S. Ahn, D. Jang, "Fabrication and Actuation of Smart Functional Nanostructure by Focused Ion Beam with 4-Axes Nanomanipulator," International Symposium on Green Manufacturing and Application (ISGMA 2013), Korean Society of Precision Engineering, Ohau, Hawaii, USA, June 25-29, 2013.
- K. Lee†, B. Bhandari, W. Chu, G. Lee, H. Yoon, J. Lee, E. Bilegt, J. Park, M. Kim, J. Song, C. Lee, C. Song, S. Ahn, "Installation of off-grid hybrid power generation system and smart grid in remote mountainous village of Nepal," International Symposium on Green Manufacturing and Applications (ISGMA 2013), Korean Society for Precision Engineering, Ohau, Hawaii, USA, June 25-29, 2013.
- S. Ahn†, J. Choi, C. Kim, G. Lee, H. Lee, K. Cho, D. Chun, C. Lee, "Laser-assisted nano particle deposition system and its application for dye sensitized solar cell fabrication," 62nd CIRP General Assembly, Part I presentation, Hong Kong, China, August 19-25, 2012.
- J. Choi†, C. Kim, G. Lee, H. Lee, C. Lee, S. Ahn, "Fabrication of flexible dye sensitized solar cell using laser assisted nano particle deposition system," Asia-Pacific Forum on Renewable Energy 2012, Lotte Hotel, Jeju, Korea, November 26-29, 2012.
- J. Choi†, C. Kim, G. Lee, H. Lee, C. Lee, S. Ahn, "Influence of Laser Sintering Treatment on Flexible Dye-sensitized Solar Cell Fabricate by Nano Particle Deposition System," International Symposium on Green Manufacturing and Applications (ISGMA 2012), Korean Society of Precision Engineering, Jeju, Korea, August 27-29, 2012.
- H. Lee†, C. Kim, G. Lee, J. Choi, J. Lee, D. Jang, S. Ahn, "Localized Surface Polishing Process using Nanomechanical Tools," International Symposium on Green Manufacturing and Applications (ISGMA 2012),Korean Society of Precision Engineering, Jeju, Korea, August 27-29, 2012.
- G. Park†, S. Kim, J. Kim, G. Lee, M. Kim, S. Ahn, "An Experimental Study on Temperature Characteristics of Korean Traditional Ondol System in Varying Gorae Geometry: Application of Goguryeo Style Jjok Gudeul," International Symposium on Green Manufacturing and Applications (ISGMA 2012), Jeju, Korea, August 27-29, 2012.
- G. Lee†, C. Kim, J. Choi, H. Lee, S. Ahn, "Direct Pattern Writing of Tin Particles using Nano Particle Deposition System (NPDS)," International Symposium on Green Manufacturing and Applications (ISGMA 2012), Jeju, Korea, August 27-29, 2012.
- K. Suh†, C. Pang, G. Lee, T. Kim, S. Kim, H. Kim, S. Ahn, C. Lee, D. Kang, W. Bae, "Bio-inspired reversible mechanical interlocking of nanofibers for skin-attachable sensors," EU-Korea Conference on Science and Technology (EKC2012), Korean Scientists and Engineers Association Germany (VeKNI) and the Korean Federation of Science and Technology Societies (KOFST), Estrel Hotel, Berlin, Germany, July 26-28, 2012.
- K. Kim†, J. Lee, G. Lee, C. Kim, J. Choi, H. Lee, S. Ahn, C. Lee, "Noble fabrication of TiO2 working electrode using Laser-assisted Nano Particle Deposition System (La-NPDS)," 2012 MRS Spring meeting, San Francisco, CA, US, April 9-13, 2012.
- S. Ahn†, C. Kim, G. Lee, "Nanoscale 3D Printing System using Nano Particle Deposition Sustem and Focused Ion Beam," The 2nd International Symposium on Hybrid Materials and Processing, Busan, South Korea, October 27–29, 2011.
- S. Ahn†, B. Bhandari, G. Lee, K. Lee, H. Yoon, D. Kim, S. Song, J. Moon, S. Kim, Y. Kim, H. Kim, S. Yu, W. Eun, H. Jeong, R. Maskey, "Off-grid sustainable small-scale Photovoltaic (PV) project in high altitude region of Nepal," International Conference on Appropriate Technology, Seoul National University, Seoul, Korea, December 2, 2011.
- J. Choi†, G. Lee, C. Kim, D. Kim, M. Kim, D. Chun, C. Lee, S. Ahn, "Dye-sensitized solar cell (DSSC) with TiO2 multilayer fabrication by nano particle deposition system (NPDS)," The 18th International Conference on Composite Materials (ICCM18), The Korean Society of Composite Materials (KSCM), Jeju, Korea, August 21-26, 2011.
- C. Kim†, G. Lee, S. Ahn, "Hybrid Nanoscale Manufacturing System using Focused Ion Beam and Nanoparticle Deposition Systems," The 10th International Conference on Nanoimprint and Nanoprint Technology (NNT), Jeju, Korea, October 19-21, 2011.
- B. Bhandari†, G. Lee, D. Choi, J. Kim, S. Ahn, "Development of CFRP precision gantry beams for 11th Generation LCD Panel manufacturing," 18th International Conference on composite materials, Jeju Island, Korea, August 21-26, 2011.
- B. Bhandari†, G. Lee, D. Choi, J. Kim, S. Ahn, "CFRP Gantry Beams for Energy Saving in LCD Manufacturing Motion Stage System," International Symposium on Green Manufacturing and Application 2011 (ISGMA 2011), Hoam Convention Center, Seoul National University, Seoul, Korea, October 6-7, 2011.
- B. Bhandari†, G. Lee, K. Lee, H. Yoon, D. Kim, S. Song, J. Moon, R. Maskey, S. Ahn, "Off-grid sustainable small-scale Photovoltaic (PV) project in high altitude region of Nepal," Addressing Climate Change For Sustainable Development Through Up-Scaling Renewable Energy Technologies, Kathmandu, Nepal, October 12-14, 2011.
- R. Maskey†, B. Bhandari, G. Lee, K. Lee, H. Yoon, D. Kim, S. Song, J. Moon, S. Kim, Y. Kim, H. Kim, S. Yu, W. Eun, H. Jeong, S. Ahn, "Solar Generating System Installation and a Study on the Efficiency Monitoring in High Altitude Village in Nepal," International Symposium on Green Manufacturing and Applications (ISGMA 2011), Seoul National University, Seoul, Korea, October 6-7, 2011.
- D. Chun†, J. Choi, G. Lee, S. Ahn, "Fabrication of semi-conductive oxide layer on polymer substrate for dye-sensitized solar cell using nano particle deposition system and laser treatment," International Symposium on Green Manufacturing and Applications (ISGMA 2011), Seoul National University, Seoul, Korea, October 6-7, 2011.
- C. Kim†, H. Kim, G. Lee, D. Kim, J. Choi, D. Jang S. Ahn, "Design for Nanomanufacturing (DFnM) of Focused Ion Beam (FIB) Process," Tsinghua University, Beijing, China, June 7-8, 2011.Excellent Poster Award.
- C. Kim†, D. Chun, J. Choi, G. Lee, D. Kim, S. Ahn, "Characterization of Room Temperature Nanoparticle Deposition on Patterned Substrate," The 2nd International Symposium on Hybrid Materials and Processing (HyMap 2011), National Core Research Center for Hybrid Materials Solution, Pusan National University, Busan, Korea, October 27-29, 2011.
- K. Lee†, G. Lee, J. Choi, R. Wu, S. Ahn, "Design and Fabrication of a Smart Flexible Structure using Shape Memory Alloy Wire (SMA)," The third IEEE RAS / EMBS International Conference on Biomedical Robotics and Biomechatronics (IEEE BioRob 2010), Institute of Electrical and Electronics Engineers Robotics and Automation / Engineering, Medicine, and Biology (IEEE RAS / EMBS), Tokyo, Japan, September 26-29, 2010.
- G. Lee†, J. Choi, S. Ahn, "Ionic Polymer-Metal Composite (IPMC) soft morphing actuator," The International Symposium on Nature-Inspired Technology 2010 (ISNIT 2010), Seoul National University, Korea, October 14-15, 2010.
- G. Lee†, K. Wie, Y. Hong, H. Yoon, M. Kim, H. Kim, S. Ahn, "A Study of Tool Pattern Design for Calcified-Atherosclerotic-Plaque Removal Robot," The third IEEE RAS / EMBS International Conference on Biomedical Robotics and Biomechatronics (IEEE BioRob 2010), Institute of Electrical and Electronics Engineers Robotics and Automation / Engineering, Medicine, and Biology (IEEE RAS / EMBS), Tokyo, Japan, September 26-29, 2010.
- H. Kim†, J. Kim, H. Yoon, G. Lee, J. Choi, S. Ahn, "Design of Soft Morphing Structures Made of Flexible Polymers and Shape Memory Alloy Actuators," 2010 Asian Conference on Design & Digital Engineering, Society of CAD/CAM Engineers, Jeju Island, Korea, August 26-27, 2010.
- Y. Hong†, G. Lee, Y. Cho, C. Song, S. Ahn, "Evaluation of Diagnostic Performance for the gear box Considering the Measurement Position Effect with Wavelet Packet Transform," 4th International Manufacturing Science and Engineering Conference(MSEC 2009), American Society of Mechanical Engineers (ASME), West Lafayette, IN, USA, October 4-7, 2009.
Domestic Conferences
- 이길용, 이현택, 안성훈, 2017, "나노스케일 3차원 프린터와 이를 이용한 기능성 구조의 제작," 한국생산제조시스템학회 춘계학술대회, 한국생산제조시스템학회, 4월26일~28일, 호텔인터불고엑스코, 대구.
- 안성훈, 이현택, 왕웨이, 추원식, 이길용, 김형수, 송성혁, 이철림, 김민수, 2017, "3D/4D 프린팅을 이용한 자유형상 제작 (Fabrication of Freeform Parts Using 3D/4D Printing)," 제 27회 광기술 워크샵- KIST 강릉분원, 4월 21일.
- 이현택, 안성훈, 이길용, 2016, "이온빔 가열방식을 이용한 형상기억합금의 마이크로스케일 구동," 한국정밀공학회 2016추계학술대회, 한국정밀공학회, 10월26일~10월28일, 디오션리조트호텔, 여수.
- 민수홍, 이길용, 양진규 and 안성훈, 2016, "전기방사법을 이용한 나노스케일 압전 섬유 소자 제작," 한국정밀공학회 추계학술대회, 한국 정밀공학회, 10월 26~28일, 여수 디오션리조트, 여수.
- 김은섭, 안성훈, 윤해성, 이길용, 2015, "공기역학적 나노입자 집속 인쇄공정으로 실리콘 기판에 적층된 은 나노입자의 적층 특성," 한국정밀공학회 추계학술대회, 한국정밀공학회, 12월 16~18일, 하이원리조트 컨벤션호텔, 강원도 정선.
- 윤해성, 장기환, 김은섭, 이현택, 박현서, 김대욱, 김충수, 이길용, 이건우, 안성훈, 2015, "AFN printing과 FIB를 사용하는 나노스케일 3차원 프린팅 공정용 통합 CAD/CAM," 한국 CAD/CAM학회 동계학술대회, 한국 CAD/CAM학회, 2월 4일~6일, 휘닉스파크, 평창.
- 윤해성, 안성훈, 장기환, 김은섭, 이현택, 이길용, 김충수, 2014, "3차원 프린팅을 이용한 마이크로 축전기의 제작," 한국정밀공학회 추계학술대회, 한국정밀공학회, 10월 29~31일, 창원 CECO(창원컨벤션센터), 창원.
- 김은섭, 안성훈, 윤해성, 이현택, 이길용, 2014, "AFN Printing을 이용하여 적층된 마이크로 구조물의 접착력 평가방법 개발," 한국정밀공학회 추계학술대회, 한국정밀공학회, 10월 29~30일, 창원 CECO(창원컨벤션센터), 창원.
- 장기환, 안성훈, 윤해성, 김은섭, 이현택, 김충수, 이길용, 2014, "나노스케일 3차원 프린팅 시스템을 이용한 열 구동기 제작," 한국정밀공학회 추계학술대회, 한국정밀공학회, 10월 29~31일, 창원 CECO(창원컨벤션센터), 창원.
- 송지현, 안성훈, 윤해성, 이길용, 이현택, 2014, "AFN Printing을 이용하여 제작한 다중 은 팁 정전구동기의 활용," 한국정밀공학회 추계학술대회, 한국정밀공학회, 10월 29~31일, 창원 CECO(창원컨벤션센터), 창원.
- 최정오, 김충수, 이길용, 이현택, 안성훈, 2014, "레이저 이용 나노 입자 적층 시스템으로 제작한 유연기판 염료 감응 태양전지의 효율 향상에 대한 연구," 나노 임프린트·몰딩·프린트 학술대회, 2월 13일, 연세대학교, 서울.
- 송지현, 안성훈, 윤해성, 이길용, 이현택, 2014, "펄스 방식 나노 입자 적층 시스템을 이용한 정전 구동기의 제작," 한국정밀공학회 춘계학술대회, 한국정밀공학회, 5월 14~16일, 제주 라마다프라자제주호텔, 제주.
- 이현택, 김충수, 이길용, 윤해성, 최정오, 장기환, 안성훈, 2014, "나노스케일 3차원 프린팅 시스템을 이용하여 제작된 은 마이크로 구조물의 실시간 기계적 물성 평가," 나노 임프린트.몰팅.프린트 학술대회, 2월 13일, 연세대학교, 서울, Best Poster Award.
- 이현택, 이길용, 김충수, 최정오, 박재일, 송지현, 장기환, 이건우, 안성훈, 2014, "나노스케일 3차원 프린팅 시스템," 한국CAD/CAM학회 학술발표회, 한국CAD/CAM 학회, 2월 12~14일, 휘닉스파크, 평창.
- 이길용, 안성훈, 김충수, 최정오, 윤해성, 이현택, 박재일, 2013, "펄스 방식 나노 입자 적층 시스템을 이용한 전도성 은 도선의 직접 인쇄," 한국정밀공학회 추계학술대회, 한국정밀공학회, 10월 30일~ 11월 1일, BEXCO, 부산.
- 박재일, 안성훈, 이길용, 김충수, 최정오, 이현택, 2013, "압전성 에너지 하베스팅을 위한 세라믹 입자-탄성중합체 복합재의 수치적 모델링," 한국정밀공학회 추계학술대회, 한국정밀공학회, 10월 30일~ 11월 1일, BEXCO, 부산..
- 이현택, 안성훈, 김충수, 이길용, 최정오, 박재일, 장기환, 2013, "나노스케일 3차원 프린팅 시스템을 이용하여 제작된 마이크로 형상의 실시간 물성 평가," 한국정밀공학회 추계학술대회, 한국정밀공학회, 10월 30일~ 11월 1일, BEXCO, 부산.
- 최정오, 안성훈, 김충수, 이길용, 이현택, 박재일, 이선영, 2013, "나노입자 적층 시스템을 사용한 다층 구조 염료 감응형 태양전지의 제작 및 효율에 대한 연구," 한국정밀공학회 춘계학술대회, 한국정밀공학회, 5월 29~31일, 라마다프라자호텔, 제주.
- 박재일, 안성훈, 이길용, 김충수, 윤해성, 최정오, 이현택, 2013, "세라믹 나노입자-탄성중합체 복합재를 이용한 에너지 하베스팅 장치의 제작," 한국정밀공학회 춘계학술대회, 한국정밀공학회, 5월 29~31일, 제주 라마다프라자제주호텔, 제주.
- 김충수, 최정오, 이길용, 이현택, 박재일, 지텐드라, Jang, Dong-Young, 이선영, Lee, Kunwoo, 안성훈, 2013, " 나노입자적층시스템의 나노가공공정의 응용 ," 한국생산제조시스템학회 춘계학술대회, 한국생산제조시스템학회, 4월 24~26일, BEXCO, 부산.
- 안성훈, 이건우, 이선영, 김충수, 이길용, 최정오, 윤해성, 이현택, 박재일, 2012, "나노스케일 3차원 프린팅 시스템 ," 한국정밀공학회 추계학술대회, 한국정밀공학회, 10월 24~26일, 광주과학기술원, 광주.
- 김충수, 안성훈, 최정오, 이길용, 윤해성, 이현택, 박재일, 이지성, 장동영, 2012, "집속이온빔과 나노입자적층시스템을 사용한 금속나노 홈의 제작과 계면 분석 ," 한국정밀공학회 추계학술대회, 한국정밀공학회, 10월 24~26일, 광주과학기술원, 광주.
- 이길용, 김충수, 최정오, 윤해성, 이현택, 박재일, 2012, "나노입자적층 시스템을 이용한 상온 다종재료 프린팅," 한국정밀공학회 추계학술대회, 한국정밀공학회, 10월 24~26일, 광주과학기술원, 광주.
- 최정오, 안성훈, 김충수, 이길용, 이현택, 박재일, 이선영, 2012, "레이저 이용 나노입자적층 장치를 사용한 플렉시블 염료 감응형 태양전지의 제작," 한국정밀공학회 2012년도 추계학술대회, 한국정밀공학회, 10월 24~26일, 광주과학기술원 오룡관, 광주.
- 최정오, 안성훈, 이길용, 김충수, 김동현, 이현택, 박재일, 이선영, 2012, "나노 입자 적층 시스템과 UV 레이저를 이용한 염료감응형 태양전지의 제작과 효율 향상에 대한 연구," 한국정밀공학회 춘계학술대회, 한국정밀공학회, 5월 30일 ~ 6월 1일, 대전 컨벤션 센터, 대전.
- 김충수, 안성훈, 이길용, 최정오, 장동영, 2011, "하이브리드 제조공정을 이용한 다종재료의 3차원 나노구조 제작에 관한 연구," 한국정밀공학회 2011년도 추계학술대회.
- 이길용, Binayak Bhandari, 이경태, 김동현, 윤해성, 문종설, 송성혁, 안성훈, 2011, "네팔 고산지역 태양전지 발전시스템 설치 지원," 한국정밀공학회 2011 추계학술대회, 한국정밀공학회, 10월 26일-28일, 경주교육문화회관, 경주.
- Binayak Bhandari, 이길용, Dong-Soo Choi, Jun-Hyun Kim, 안성훈, 2011, "CFRP composite gantry beams for energy and weight saving," 한국정밀공학회 2011년도 춘계학술대회.
- 김충수, 안성훈, 이길용, 김형중, 최정오, 김동현 and Jang, D. Y., 2011, "이온빔 조사 경로에 따른 집속이온빔 가공공정의 효율 평가," 한국정밀공학회 춘계학술대회, 한국정밀공학회, 라마다 프라자 제주 호텔, 제주.
- 이길용, 오인철, 안성훈*, 2010, "형상기억합금과 유리섬유강화플라스틱을 이용한 지능 구조의 설계 및 제작," 한국복합재료학회 추계학술대회, 한국복합재료학회, 10월 22일, 100주년 기념관, 서울과학기술대학교, 서울.
- 이길용, Binayak Bhandari, 이재철, 김명섭, 최동수, 김준현, 안성훈*, 2010, "정밀 스테이지의 탄소섬유강화플라스틱 갠트리 크로스빔의 설계에 관한 연구," 한국복합재료학회 추계학술대회, 한국복합재료학회, 10월 22일, 100주년 기념관, 서울과학기술대학교, 서울.
- 이길용, 김지수, 김명선, and 안성훈*, 2010, "이온교환 고분자-금속 복합재를 이용한 지능형 구동기의 설계 및 제작에 관한 연구," 2010년 한국CAD/CAM학회 학술발표회, 한국CAD/CAM학회 , 1월 27~29일, 한화리조트 컨벤션 센터, 평창.
- 이길용, 김지수, 안성훈*, 2009, "이온교환 고분자-금속 복합재 구동기를 이용한 마이크로 로봇의 설계에 관한 연구," 대한기계학회 마이크로/나노공학부문 춘계학술대회, 대한기계학회, 5월 28~29일, 서울대학교 정밀기계설계 공동연구소, 서울.
- 박정빈, 김진웅, 김형중, 이길용, 이경태, 박재석, 안성훈, 2008, "실험 계획법을 이용한 PCB 가공용 마이크로 앤드밀의 수명 평가," 한국정밀공학회 춘계학술대회, 한국정밀공학회, 6월 11~13일, 제주컨벤션센터, 제주.
- 김윤미, 김민생, 이재철, Adrian, 얀준, 이길용, 안성훈*, 2008, "NiTi 형상기억합금 wire의 거동해석," 한국정밀공학회 춘계학술대회, 한국정밀공학회, 6월 11~13일, 제주컨벤션센터, 제주.
- 김충수, 최정오, 이길용, 이현택, 박재일, 지텐드라, Jang, Dong-Young, 이선영, Lee, Kunwoo, 안성훈, "나노입자적층시스템의 나노가공공정의 응용," 한국생산제조시스템학회 춘계학술대회, 한국샌산제조시스템학회, 4월 24~26일, BEXCO, 부산.
Dissertations
G. Lee, 2013, Multi-material direct printing by pulsed-nano particle deposition system (P-NPDS), Ph.D. thesis, Seoul National University
G. Lee, 2008, A Study on the Improvement of Damping Performance and the Beam Flexure’s Optimal Design for the Passive Sub-Hertz Vibration Isolator, M.S. thesis, Seoul National University
G. Lee, 2006, Disk-type Capacitive Displacement Sensor for Radial and Axial Measurement, B.S. thesis, Seoul National University
G. Lee, 2008, A Study on the Improvement of Damping Performance and the Beam Flexure’s Optimal Design for the Passive Sub-Hertz Vibration Isolator, M.S. thesis, Seoul National University
G. Lee, 2006, Disk-type Capacitive Displacement Sensor for Radial and Axial Measurement, B.S. thesis, Seoul National University
Invited Talks
† Presenter
[16] G. Lee†, "Additive manufacturing (AM) for its application to functional devices,” University of Ulsan, Korea, April 6, 2023.
[15] G. Lee†, "Functional structures and devices fabricated by additive manufacturing (AM) process,” 3D프린팅 산업육성과 글로벌 진출전략 세미나, 대구광역시 그랜드호텔, Korea, July 18, 2022.
[14] G. Lee†, "Sensing devices fabricated by additive manufacturing (AM) and their applications,” Hanyang University ERICA, Korea, July 30, 2021.
[13] G. Lee†, "Functional structures and devices fabricated by additive manufacturing (AM) process,” LIG Nex1, Korea, July 8, 2021.
[12] G. Lee†, "Printed functional materials and structures and their applications to sensing devices,” KSMTE Young Engineers Session, The Korean Society of Manufacturing Technology Engineers (KSMTE), Jeju KAL Hotel, Jeju, Korea, December 7, 2017.
[11] G. Lee†, “Electro-spun micro structured thin film and its application to piezo-resistive pressure sensor," The 3rd 3D Printing Users’ Forum, Korean Society for Precision Engineering (KSPE), Ramada Plaza Hotel, Jeju, Korea, May 17, 2017.
[10] G. Lee†, S. Ahn, "Nanoparticle 3D printer,” Young Scientist Curriculum, Hanyang University, Ansan, Korea, January 3, 2017.
[9] G. Lee†, S. Ahn, "Nanoparticle 3D printer and its applications to the sensing devices," Korea Institute of Energy Research, Daejeon, Korea, August 29, 2016.
[8] G. Lee†, J. Rivey, J. Yang, " Transient Surface Wave Visualization of Aluminum plate by using Acoustic Camera and Beamforming Technique", SM Instruments Inc., Daejeon, Korea, May 16, 2016.
[7] G. Lee†, S. Ahn, "Aerodynamic focusing of nanoparticles and its application to solvent-free direct printing technique", Seoul National University, Korea, November 11, 2014.
[6] S. Ahn†, C. Lee, C. Kim, G. Lee, "Nano-scale 3D Printing," Korea-American Scientists and Engineers Association, Northwest Regional Conference on Bio-Nano, Information-Communications, and Energy-Transportation Technology, Alder Commons, University of Washington, September 21, 2013.
[5] S. Ahn†, D. Chun, J. Choi, C. Kim, G. Lee, H. Lee, K. Cho, C. Lee, "Nano Particle Deposition System (NPDS) and Its Applications to Energy Devices," International Symposium on Green Manufacturing and Applications 2012 (ISGMA 2012), Keynote speech, Jeju, Korea, August 28, 2012.
[4] S. Ahn†, G. Lee, J. Yan, M. Kim, B. Bhandari, J. Pandey, "Functionalization and applications of carbon-based composites," Hyundai Motors, Uiwang, Korea, April 9. 2012.
[3] S. Ahn†, C. Kim, G. Lee, "Nanoscale 3D printing system using nano particle deposition system and focused ion beam," The 2nd International Symposium of Hybrid Materials and Processing, Invited Speaker of the Conference, Busan, Korea, October 27~29, 2011.
[2] S. Ahn†, G. Lee, K. Lee, H. Kim, B. Jung, M. Kim, J. Choi, R. Wu, J. Kim, H. Yoon, "Design and Manufacturing Process of Soft Morphing Structures," Agency for Defence Development, Daejeon, Korea, September 15, 2010.
[1] S. Ahn†, G. Lee, K. Lee, R. Wu, J. Choi , "Manufacturing Process of Softmorphing Structures- Application of 3D Printing," CRIM Lab, ARTS Lab and IIT Center, Scuola Superiore Sant'Anna, Potendero, Italy, August 24., 2010.
[16] G. Lee†, "Additive manufacturing (AM) for its application to functional devices,” University of Ulsan, Korea, April 6, 2023.
[15] G. Lee†, "Functional structures and devices fabricated by additive manufacturing (AM) process,” 3D프린팅 산업육성과 글로벌 진출전략 세미나, 대구광역시 그랜드호텔, Korea, July 18, 2022.
[14] G. Lee†, "Sensing devices fabricated by additive manufacturing (AM) and their applications,” Hanyang University ERICA, Korea, July 30, 2021.
[13] G. Lee†, "Functional structures and devices fabricated by additive manufacturing (AM) process,” LIG Nex1, Korea, July 8, 2021.
[12] G. Lee†, "Printed functional materials and structures and their applications to sensing devices,” KSMTE Young Engineers Session, The Korean Society of Manufacturing Technology Engineers (KSMTE), Jeju KAL Hotel, Jeju, Korea, December 7, 2017.
[11] G. Lee†, “Electro-spun micro structured thin film and its application to piezo-resistive pressure sensor," The 3rd 3D Printing Users’ Forum, Korean Society for Precision Engineering (KSPE), Ramada Plaza Hotel, Jeju, Korea, May 17, 2017.
[10] G. Lee†, S. Ahn, "Nanoparticle 3D printer,” Young Scientist Curriculum, Hanyang University, Ansan, Korea, January 3, 2017.
[9] G. Lee†, S. Ahn, "Nanoparticle 3D printer and its applications to the sensing devices," Korea Institute of Energy Research, Daejeon, Korea, August 29, 2016.
[8] G. Lee†, J. Rivey, J. Yang, " Transient Surface Wave Visualization of Aluminum plate by using Acoustic Camera and Beamforming Technique", SM Instruments Inc., Daejeon, Korea, May 16, 2016.
[7] G. Lee†, S. Ahn, "Aerodynamic focusing of nanoparticles and its application to solvent-free direct printing technique", Seoul National University, Korea, November 11, 2014.
[6] S. Ahn†, C. Lee, C. Kim, G. Lee, "Nano-scale 3D Printing," Korea-American Scientists and Engineers Association, Northwest Regional Conference on Bio-Nano, Information-Communications, and Energy-Transportation Technology, Alder Commons, University of Washington, September 21, 2013.
[5] S. Ahn†, D. Chun, J. Choi, C. Kim, G. Lee, H. Lee, K. Cho, C. Lee, "Nano Particle Deposition System (NPDS) and Its Applications to Energy Devices," International Symposium on Green Manufacturing and Applications 2012 (ISGMA 2012), Keynote speech, Jeju, Korea, August 28, 2012.
[4] S. Ahn†, G. Lee, J. Yan, M. Kim, B. Bhandari, J. Pandey, "Functionalization and applications of carbon-based composites," Hyundai Motors, Uiwang, Korea, April 9. 2012.
[3] S. Ahn†, C. Kim, G. Lee, "Nanoscale 3D printing system using nano particle deposition system and focused ion beam," The 2nd International Symposium of Hybrid Materials and Processing, Invited Speaker of the Conference, Busan, Korea, October 27~29, 2011.
[2] S. Ahn†, G. Lee, K. Lee, H. Kim, B. Jung, M. Kim, J. Choi, R. Wu, J. Kim, H. Yoon, "Design and Manufacturing Process of Soft Morphing Structures," Agency for Defence Development, Daejeon, Korea, September 15, 2010.
[1] S. Ahn†, G. Lee, K. Lee, R. Wu, J. Choi , "Manufacturing Process of Softmorphing Structures- Application of 3D Printing," CRIM Lab, ARTS Lab and IIT Center, Scuola Superiore Sant'Anna, Potendero, Italy, August 24., 2010.